Now with variable sound level control, the combined strobe light and siren adds eye-catching audio visual alarms. When triggered, the siren generates a loud alarm sound () and the strobe light flashes brightly, giving a clear alert of an alarm condition. 

The Alarm Strobe Light sensor plugs into any of our intelligent  or  controllers. The sensor can be extended up to 100 feet from the controller using standard CAT5 cable (a 5 ft cable is provided).

Since the siren and alarm are both incorporated into one device, only one RJ-45 jack on a controller is needed. When plugged into the RJ-45 port, the controller will auto detect the sensor, and display the status of the device.

The alarm can be triggered via the web interface either manually or by configuring the alarm to turn on or off at specific times. 

The device can be also triggered by other sensors connected to the  controller or by an alarm condition generated by the controller. The strobe light and siren can be fully integrated with the sensor notification matrix on our Linux based systems.

Each device has its own SNMP OID so that status can be collected over the network and graphed using external application like MRTG.